Name

execve — execute program

Synopsis

        #include <unistd.h>
int execve( const char *filename,
  char *const argv[],
  char *const envp[]);
 

DESCRIPTION

execve() executes the program pointed to by filename. filename must be either a binary executable, or a script starting with a line of the form:

#! interpreter [optional-arg]

For details of the latter case, see "Interpreter scripts" below.

argv is an array of argument strings passed to the new program. By convention, the first of these strings should contain the filename associated with the file being executed. envp is an array of strings, conventionally of the form key=value, which are passed as environment to the new program. Both argv and envp must be terminated by a null pointer. The argument vector and environment can be accessed by the called program's main function, when it is defined as:

int main(int argc, char *argv[], char *envp[])

execve() does not return on success, and the text, data, bss, and stack of the calling process are overwritten by that of the program loaded.

If the current program is being ptraced, a SIGTRAP is sent to it after a successful execve().

If the set-user-ID bit is set on the program file pointed to by filename, and the underlying filesystem is not mounted nosuid (the MS_NOSUID flag for mount(2)), and the calling process is not being ptraced, then the effective user ID of the calling process is changed to that of the owner of the program file. Similarly, when the set-group-ID bit of the program file is set the effective group ID of the calling process is set to the group of the program file.

The effective user ID of the process is copied to the saved set-user-ID; similarly, the effective group ID is copied to the saved set-group-ID. This copying takes place after any effective ID changes that occur because of the set-user-ID and set-group-ID mode bits.

If the executable is an a.out dynamically linked binary executable containing shared-library stubs, the Linux dynamic linker ld.so(8) is called at the start of execution to bring needed shared objects into memory and link the executable with them.

If the executable is a dynamically linked ELF executable, the interpreter named in the PT_INTERP segment is used to load the needed shared objects. This interpreter is typically /lib/ld-linux.so.2 for binaries linked with glibc (see ld-linux.so(8)).

All process attributes are preserved during an execve(), except the following:

The process attributes in the preceding list are all specified in POSIX.1. The following Linux-specific process attributes are also not preserved during an execve():

  • The prctl(2) PR_SET_DUMPABLE flag is set, unless a set-user-ID or set-group ID program is being executed, in which case it is cleared.

  • The prctl(2) PR_SET_KEEPCAPS flag is cleared.

  • (Since Linux 2.4.36 / 2.6.23) If a set-user-ID or set-group-ID program is being executed, then the parent death signal set by prctl(2) PR_SET_PDEATHSIG flag is cleared.

  • The process name, as set by prctl(2) PR_SET_NAME (and displayed by ps −o comm), is reset to the name of the new executable file.

  • The SECBIT_KEEP_CAPS securebits flag is cleared. See capabilities(7).

  • The termination signal is reset to SIGCHLD (see clone(2)).

  • The file descriptor table is unshared, undoing the effect of the CLONE_FILES flag of clone(2).

Note the following further points:

  • All threads other than the calling thread are destroyed during an execve(). Mutexes, condition variables, and other pthreads objects are not preserved.

  • The equivalent of setlocale(LC_ALL, "C") is executed at program start-up.

  • POSIX.1 specifies that the dispositions of any signals that are ignored or set to the default are left unchanged. POSIX.1 specifies one exception: if SIGCHLD is being ignored, then an implementation may leave the disposition unchanged or reset it to the default; Linux does the former.

  • Any outstanding asynchronous I/O operations are canceled (aio_read(3), aio_write(3)).

  • For the handling of capabilities during execve(), see capabilities(7).

  • By default, file descriptors remain open across an execve(). File descriptors that are marked close-on-exec are closed; see the description of FD_CLOEXEC in fcntl(2). (If a file descriptor is closed, this will cause the release of all record locks obtained on the underlying file by this process. See fcntl(2) for details.) POSIX.1 says that if file descriptors 0, 1, and 2 would otherwise be closed after a successful execve(), and the process would gain privilege because the set-user_ID or set-group_ID mode bit was set on the executed file, then the system may open an unspecified file for each of these file descriptors. As a general principle, no portable program, whether privileged or not, can assume that these three file descriptors will remain closed across an execve().

Interpreter scripts

An interpreter script is a text file that has execute permission enabled and whose first line is of the form:

#! interpreter [optional-arg]

The interpreter must be a valid pathname for an executable file. If the filename argument of execve() specifies an interpreter script, then interpreter will be invoked with the following arguments:

interpreter [optional-arg] filename arg...

where arg... is the series of words pointed to by the argv argument of execve(), starting at argv[1].

For portable use, optional-arg should either be absent, or be specified as a single word (i.e., it should not contain white space); see NOTES below.

Since Linux 2.6.28, the kernel permits the interpreter of a script to itself be a script. This permission is recursive, up to a limit of four recursions, so that the interpreter may be a script which is interpreted by a script, and so on.

Limits on size of arguments and environment

Most UNIX implementations impose some limit on the total size of the command-line argument (argv) and environment (envp) strings that may be passed to a new program. POSIX.1 allows an implementation to advertise this limit using the ARG_MAX constant (either defined in <limits.h> or available at run time using the call sysconf(_SC_ARG_MAX)).

On Linux prior to kernel 2.6.23, the memory used to store the environment and argument strings was limited to 32 pages (defined by the kernel constant MAX_ARG_PAGES). On architectures with a 4-kB page size, this yields a maximum size of 128 kB.

On kernel 2.6.23 and later, most architectures support a size limit derived from the soft RLIMIT_STACK resource limit (see getrlimit(2)) that is in force at the time of the execve() call. (Architectures with no memory management unit are excepted: they maintain the limit that was in effect before kernel 2.6.23.) This change allows programs to have a much larger argument and/or environment list. For these architectures, the total size is limited to 1/4 of the allowed stack size. (Imposing the 1/4-limit ensures that the new program always has some stack space.) Since Linux 2.6.25, the kernel places a floor of 32 pages on this size limit, so that, even when RLIMIT_STACK is set very low, applications are guaranteed to have at least as much argument and environment space as was provided by Linux 2.6.23 and earlier. (This guarantee was not provided in Linux 2.6.23 and 2.6.24.) Additionally, the limit per string is 32 pages (the kernel constant MAX_ARG_STRLEN), and the maximum number of strings is 0x7FFFFFFF.

RETURN VALUE

On success, execve() does not return, on error −1 is returned, and errno is set appropriately.

ERRORS

E2BIG

The total number of bytes in the environment (envp) and argument list (argv) is too large.

EACCES

Search permission is denied on a component of the path prefix of filename or the name of a script interpreter. (See also path_resolution(7).)

EACCES

The file or a script interpreter is not a regular file.

EACCES

Execute permission is denied for the file or a script or ELF interpreter.

EACCES

The filesystem is mounted noexec.

EAGAIN (since Linux 3.1)

Having changed its real UID using one of the set*uid() calls, the caller was—and is now still—above its RLIMIT_NPROC resource limit (see setrlimit(2)). For a more detailed explanation of this error, see NOTES.

EFAULT

filename or one of the pointers in the vectors argv or envp points outside your accessible address space.

EINVAL

An ELF executable had more than one PT_INTERP segment (i.e., tried to name more than one interpreter).

EIO

An I/O error occurred.

EISDIR

An ELF interpreter was a directory.

ELIBBAD

An ELF interpreter was not in a recognized format.

ELOOP

Too many symbolic links were encountered in resolving filename or the name of a script or ELF interpreter.

ELOOP

The maximum recursion limit was reached during recursive script interpretation (see "Interpreter scripts", above). Before Linux 3.8, the error produced for this case was ENOEXEC.

EMFILE

The per-process limit on the number of open file descriptors has been reached.

ENAMETOOLONG

filename is too long.

ENFILE

The system-wide limit on the total number of open files has been reached.

ENOENT

The file filename or a script or ELF interpreter does not exist, or a shared library needed for the file or interpreter cannot be found.

ENOEXEC

An executable is not in a recognized format, is for the wrong architecture, or has some other format error that means it cannot be executed.

ENOMEM

Insufficient kernel memory was available.

ENOTDIR

A component of the path prefix of filename or a script or ELF interpreter is not a directory.

EPERM

The filesystem is mounted nosuid, the user is not the superuser, and the file has the set-user-ID or set-group-ID bit set.

EPERM

The process is being traced, the user is not the superuser and the file has the set-user-ID or set-group-ID bit set.

EPERM

A "capability-dumb" applications would not obtain the full set of permitted capabilities granted by the executable file. See capabilities(7).

ETXTBSY

The specified executable was open for writing by one or more processes.

CONFORMING TO

POSIX.1-2001, POSIX.1-2008, SVr4, 4.3BSD. POSIX does not document the #! behavior, but it exists (with some variations) on other UNIX systems.

NOTES

Set-user-ID and set-group-ID processes can not be ptrace(2)d.

The result of mounting a filesystem nosuid varies across Linux kernel versions: some will refuse execution of set-user-ID and set-group-ID executables when this would give the user powers she did not have already (and return EPERM), some will just ignore the set-user-ID and set-group-ID bits and exec() successfully.

On Linux, argv and envp can be specified as NULL. In both cases, this has the same effect as specifying the argument as a pointer to a list containing a single null pointer. Do not take advantage of this nonstandard and nonportable misfeature! On many other UNIX systems, specifying argv as NULL will result in an error (EFAULT). Some other UNIX systems treat the envp==NULL case the same as Linux.

POSIX.1 says that values returned by sysconf(3) should be invariant over the lifetime of a process. However, since Linux 2.6.23, if the RLIMIT_STACK resource limit changes, then the value reported by _SC_ARG_MAX will also change, to reflect the fact that the limit on space for holding command-line arguments and environment variables has changed.

In most cases where execve() fails, control returns to the original executable image, and the caller of execve() can then handle the error. However, in (rare) cases (typically caused by resource exhaustion), failure may occur past the point of no return: the original executable image has been torn down, but the new image could not be completely built. In such cases, the kernel kills the process with a SIGKILL signal.

Interpreter scripts

A maximum line length of 127 characters is allowed for the first line in an interpreter scripts.

The semantics of the optional-arg argument of an interpreter script vary across implementations. On Linux, the entire string following the interpreter name is passed as a single argument to the interpreter, and this string can include white space. However, behavior differs on some other systems. Some systems use the first white space to terminate optional-arg. On some systems, an interpreter script can have multiple arguments, and white spaces in optional-arg are used to delimit the arguments.

Linux ignores the set-user-ID and set-group-ID bits on scripts.

execve() and EAGAIN

A more detailed explanation of the EAGAIN error that can occur (since Linux 3.1) when calling execve() is as follows.

The EAGAIN error can occur when a preceding call to setuid(2), setreuid(2), or setresuid(2) caused the real user ID of the process to change, and that change caused the process to exceed its RLIMIT_NPROC resource limit (i.e., the number of processes belonging to the new real UID exceeds the resource limit). From Linux 2.6.0 to 3.0, this caused the set*uid() call to fail. (Prior to 2.6, the resource limit was not imposed on processes that changed their user IDs.)

Since Linux 3.1, the scenario just described no longer causes the set*uid() call to fail, because it too often led to security holes where buggy applications didn't check the return status and assumed that—if the caller had root privileges—the call would always succeed. Instead, the set*uid() calls now successfully change the real UID, but the kernel sets an internal flag, named PF_NPROC_EXCEEDED, to note that the RLIMIT_NPROC resource limit has been exceeded. If the PF_NPROC_EXCEEDED flag is set and the resource limit is still exceeded at the time of a subsequent execve() call, that call fails with the error EAGAIN. This kernel logic ensures that the RLIMIT_NPROC resource limit is still enforced for the common privileged daemon workflow—namely, fork(2) + set*uid() + execve().

If the resource limit was not still exceeded at the time of the execve() call (because other processes belonging to this real UID terminated between the set*uid() call and the execve() call), then the execve() call succeeds and the kernel clears the PF_NPROC_EXCEEDED process flag. The flag is also cleared if a subsequent call to fork(2) by this process succeeds.

Historical

With UNIX V6, the argument list of an exec() call was ended by 0, while the argument list of main was ended by −1. Thus, this argument list was not directly usable in a further exec() call. Since UNIX V7, both are NULL.

EXAMPLE

The following program is designed to be execed by the second program below. It just echoes its command-line arguments, one per line.

/* myecho.c */

#include <stdio.h>
#include <stdlib.h>

int
main(int argc, char *argv[])
{
    int j;

    for (j = 0; j < argc; j++)
        printf("argv[%d]: %s\n", j, argv[j]);

    exit(EXIT_SUCCESS);
}

This program can be used to exec the program named in its command-line argument:

/* execve.c */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

int
main(int argc, char *argv[])
{
    char *newargv[] = { NULL, "hello", "world", NULL };
    char *newenviron[] = { NULL };

    if (argc != 2) {
        fprintf(stderr, "Usage: %s <file−to−exec>\n", argv[0]);
        exit(EXIT_FAILURE);
    }

    newargv[0] = argv[1];

    execve(argv[1], newargv, newenviron);
    perror("execve");   /* execve() returns only on error */
    exit(EXIT_FAILURE);
}

We can use the second program to exec the first as follows:

$ cc myecho.c −o myecho
$ cc execve.c −o execve
$ ./execve ./myecho
argv[0]: ./myecho
argv[1]: hello
argv[2]: world

We can also use these programs to demonstrate the use of a script interpreter. To do this we create a script whose "interpreter" is our myecho program:

$ cat > script
#!./myecho script-arg
^D
$ chmod +x script

We can then use our program to exec the script:

$ ./execve ./script
argv[0]: ./myecho
argv[1]: script-arg
argv[2]: ./script
argv[3]: hello
argv[4]: world

SEE ALSO

chmod(2), execveat(2), fork(2), ptrace(2), execl(3), fexecve(3), getopt(3), system(3), credentials(7), environ(7), path_resolution(7), ld.so(8)

COLOPHON

This page is part of release 4.07 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man−pages/.


  Copyright (c) 1992 Drew Eckhardt (drewcs.colorado.edu), March 28, 1992
and Copyright (c) 2006 Michael Kerrisk <mtk.manpagesgmail.com>

%%%LICENSE_START(VERBATIM)
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working
professionally.

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.
%%%LICENSE_END

Modified by Michael Haardt <michaelmoria.de>
Modified 1993-07-21 by Rik Faith <faithcs.unc.edu>
Modified 1994-08-21 by Michael Chastain <mecshell.portal.com>:
Modified 1997-01-31 by Eric S. Raymond <esrthyrsus.com>
Modified 1999-11-12 by Urs Thuermann <ursisnogud.escape.de>
Modified 2004-06-23 by Michael Kerrisk <mtk.manpagesgmail.com>
2006-09-04 Michael Kerrisk <mtk.manpagesgmail.com>
    Added list of process attributes that are not preserved on exec().
2007-09-14 Ollie Wild <aawgoogle.com>, mtk
    Add text describing limits on command-line arguments + environment