Name

chmod, fchmod, fchmodat — change permissions of a file

Synopsis

        #include <sys/stat.h>
int chmod( const char *pathname,
  mode_t mode);
 
int fchmod( int fd,
  mode_t mode);
 

#include <fcntl.h>            /* Definition of AT_* constants */
#include <sys/stat.h>
int fchmodat( int dirfd,
  const char *pathname,
  mode_t mode,
  int flags);
 
[Note] Note
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
fchmod():
/* Since glibc 2.16:
*/ _POSIX_C_SOURCE || /* Glibc versions <= 2.19:
*/ _BSD_SOURCE || /* Glibc versions <= 2.15:
*/ _XOPEN_SOURCE >= 500 || /* Glibc 2.12 to 2.15:
*/ _POSIX_C_SOURCE >= 200809L
fchmodat():
Since glibc 2.10:
_POSIX_C_SOURCE >= 200809L
Before glibc 2.10:
_ATFILE_SOURCE

DESCRIPTION

The chmod() and fchmod() system calls change a files mode bits. (The file mode consists of the file permission bits plus the set-user-ID, set-group-ID, and sticky bits.) These system calls differ only in how the file is specified:

  • chmod() changes the mode of the file specified whose pathname is given in pathname, which is dereferenced if it is a symbolic link.

  • fchmod() changes the mode of the file referred to by the open file descriptor fd.

The new file mode is specified in mode, which is a bit mask created by ORing together zero or more of the following:

S_ISUID (04000)

set-user-ID (set process effective user ID on execve(2))

S_ISGID (02000)

set-group-ID (set process effective group ID on execve(2); mandatory locking, as described in fcntl(2); take a new file's group from parent directory, as described in chown(2) and mkdir(2))

S_ISVTX (01000)

sticky bit (restricted deletion flag, as described in unlink(2))

S_IRUSR (00400)

read by owner

S_IWUSR (00200)

write by owner

S_IXUSR (00100)

execute/search by owner ("search" applies for directories, and means that entries within the directory can be accessed)

S_IRGRP (00040)

read by group

S_IWGRP (00020)

write by group

S_IXGRP (00010)

execute/search by group

S_IROTH (00004)

read by others

S_IWOTH (00002)

write by others

S_IXOTH (00001)

execute/search by others

The effective UID of the calling process must match the owner of the file, or the process must be privileged (Linux: it must have the CAP_FOWNER capability).

If the calling process is not privileged (Linux: does not have the CAP_FSETID capability), and the group of the file does not match the effective group ID of the process or one of its supplementary group IDs, the S_ISGID bit will be turned off, but this will not cause an error to be returned.

As a security measure, depending on the filesystem, the set-user-ID and set-group-ID execution bits may be turned off if a file is written. (On Linux, this occurs if the writing process does not have the CAP_FSETID capability.) On some filesystems, only the superuser can set the sticky bit, which may have a special meaning. For the sticky bit, and for set-user-ID and set-group-ID bits on directories, see stat(2).

On NFS filesystems, restricting the permissions will immediately influence already open files, because the access control is done on the server, but open files are maintained by the client. Widening the permissions may be delayed for other clients if attribute caching is enabled on them.

fchmodat()

The fchmodat() system call operates in exactly the same way as chmod(), except for the differences described here.

If the pathname given in pathname is relative, then it is interpreted relative to the directory referred to by the file descriptor dirfd (rather than relative to the current working directory of the calling process, as is done by chmod() for a relative pathname).

If pathname is relative and dirfd is the special value AT_FDCWD, then pathname is interpreted relative to the current working directory of the calling process (like chmod()).

If pathname is absolute, then dirfd is ignored.

flags can either be 0, or include the following flag:

AT_SYMLINK_NOFOLLOW

If pathname is a symbolic link, do not dereference it: instead operate on the link itself. This flag is not currently implemented.

See openat(2) for an explanation of the need for fchmodat().

RETURN VALUE

On success, zero is returned. On error, −1 is returned, and errno is set appropriately.

ERRORS

Depending on the filesystem, errors other than those listed below can be returned.

The more general errors for chmod() are listed below:

EACCES

Search permission is denied on a component of the path prefix. (See also path_resolution(7).)

EFAULT

pathname points outside your accessible address space.

EIO

An I/O error occurred.

ELOOP

Too many symbolic links were encountered in resolving pathname.

ENAMETOOLONG

pathname is too long.

ENOENT

The file does not exist.

ENOMEM

Insufficient kernel memory was available.

ENOTDIR

A component of the path prefix is not a directory.

EPERM

The effective UID does not match the owner of the file, and the process is not privileged (Linux: it does not have the CAP_FOWNER capability).

EROFS

The named file resides on a read-only filesystem.

The general errors for fchmod() are listed below:

EBADF

The file descriptor fd is not valid.

EIO

See above.

EPERM

See above.

EROFS

See above.

The same errors that occur for chmod() can also occur for fchmodat(). The following additional errors can occur for fchmodat():

EBADF

dirfd is not a valid file descriptor.

EINVAL

Invalid flag specified in flags.

ENOTDIR

pathname is relative and dirfd is a file descriptor referring to a file other than a directory.

ENOTSUP

flags specified AT_SYMLINK_NOFOLLOW, which is not supported.

VERSIONS

fchmodat() was added to Linux in kernel 2.6.16; library support was added to glibc in version 2.4.

CONFORMING TO

chmod(), fchmod(): 4.4BSD, SVr4, POSIX.1-2001i, POSIX.1-2008.

fchmodat(): POSIX.1-2008.

NOTES

C library/kernel differences

The GNU C library fchmodat() wrapper function implements the POSIX-specified interface described in this page. This interface differs from the underlying Linux system call, which does not have a flags argument.

Glibc notes

On older kernels where fchmodat() is unavailable, the glibc wrapper function falls back to the use of chmod(). When pathname is a relative pathname, glibc constructs a pathname based on the symbolic link in /proc/self/fd that corresponds to the dirfd argument.

SEE ALSO

chown(2), execve(2), open(2), stat(2), path_resolution(7), symlink(7)

COLOPHON

This page is part of release 4.07 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man−pages/.


  Copyright (c) 1992 Drew Eckhardt (drewcs.colorado.edu), March 28, 1992
and Copyright (C) 2006, 2014 Michael Kerrisk

%%%LICENSE_START(VERBATIM)
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working
professionally.

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.
%%%LICENSE_END

Modified by Michael Haardt <michaelmoria.de>
Modified 1993-07-21 by Rik Faith <faithcs.unc.edu>
Modified 1997-01-12 by Michael Haardt
  <michaelcantor.informatik.rwth-aachen.de>: NFS details
Modified 2004-06-23 by Michael Kerrisk <mtk.manpagesgmail.com>