Name

hd — MFM/IDE hard disk devices

DESCRIPTION

The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave is hdd.

General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order the partitions are discovered, and only nonempty, nonextended partitions get a number. However, partition numbers 1-4 are given to the four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended. Thus, the first logical partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions on an IDE disk.

For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on the second one.

They are typically created by:

mknod −m 660 /dev/hda b 3 0

mknod −m 660 /dev/hda1 b 3 1

mknod −m 660 /dev/hda2 b 3 2

...

mknod −m 660 /dev/hda8 b 3 8

mknod −m 660 /dev/hdb b 3 64

mknod −m 660 /dev/hdb1 b 3 65

mknod −m 660 /dev/hdb2 b 3 66

...

mknod −m 660 /dev/hdb8 b 3 72

chown root:disk /dev/hd*

FILES

/dev/hd*

SEE ALSO

chown(1), mknod(1), sd(4), mount(8)

COLOPHON

This page is part of release 4.07 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man−pages/.


  Copyright (c) 1993 Michael Haardt (michaelmoria.de),
    Fri Apr  2 11:32:09 MET DST 1993

%%%LICENSE_START(GPLv2+_DOC_FULL)
This is free documentation; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.

The GNU General Public License's references to "object code"
and "executables" are to be interpreted as the output of any
document formatting or typesetting system, including
intermediate and printed output.

This manual is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public
License along with this manual; if not, see
<http://www.gnu.org/licenses/>.
%%%LICENSE_END

Modified Sat Jul 24 16:56:20 1993 by Rik Faith <faithcs.unc.edu>
Modified Mon Oct 21 21:38:51 1996 by Eric S. Raymond <esrthyrsus.com>
(and some more by aeb)