Name

readdir — read a directory

Synopsis

        #include <dirent.h>
struct dirent *readdir( DIR *dirp);
 

DESCRIPTION

The readdir() function returns a pointer to a dirent structure representing the next directory entry in the directory stream pointed to by dirp. It returns NULL on reaching the end of the directory stream or if an error occurred.

In the glibc implementation, the dirent structure is defined as follows:

struct dirent {
  ino_t   d_ino;
/* Inode number */
  off_t   d_off;
/* Not an offset; see below */
  unsigned short   d_reclen;
/* Length of this record */
  unsigned char   d_type;
/* Type of file; not supported
by all filesystem types */
  char   d_name[256];
/* Null-terminated filename */
};

The only fields in the dirent structure that are mandated by POSIX.1 are d_name and d_ino. The other fields are unstandardized, and not present on all systems; see NOTES below for some further details.

The fields of the dirent structure are as follows:

d_ino

This is the inode number of the file.

d_off

The value returned in d_off is the same as would be returned by calling telldir(3) at the current position in the directory stream. Be aware that despite its type and name, the d_off field is seldom any kind of directory offset on modern filesystems. Applications should treat this field as an opaque value, making no assumptions about its contents; see also telldir(3).

d_reclen

This is the size (in bytes) of the returned record. This may not match the size of the structure definition shown above; see NOTES.

d_type

This field contains a value indicating the file type, making it possible to avoid the expense of calling lstat(2) if further actions depend on the type of the file.

When a suitable feature test macro is defined (_DEFAULT_SOURCE on glibc versions since 2.19, or _BSD_SOURCE on glibc versions 2.19 and earlier), glibc defines the following macro constants for the value returned in d_type:

DT_BLK

This is a block device.

DT_CHR

This is a character device.

DT_DIR

This is a directory.

DT_FIFO

This is a named pipe (FIFO).

DT_LNK

This is a symbolic link.

DT_REG

This is a regular file.

DT_SOCK

This is a UNIX domain socket.

DT_UNKNOWN

The file type could not be determined.

Currently, only some filesystems (among them: Btrfs, ext2, ext3, and ext4) have full support for returning the file type in d_type. All applications must properly handle a return of DT_UNKNOWN.

d_name

This field contains the null terminated filename. See NOTES.

The data returned by readdir() may be overwritten by subsequent calls to readdir() for the same directory stream.

RETURN VALUE

On success, readdir() returns a pointer to a dirent structure. (This structure may be statically allocated; do not attempt to free(3) it.)

If the end of the directory stream is reached, NULL is returned and errno is not changed. If an error occurs, NULL is returned and errno is set appropriately. To distinguish end of stream and from an error, set errno to zero before calling readdir() and then check the value of errno if NULL is returned.

ERRORS

EBADF

Invalid directory stream descriptor dirp.

ATTRIBUTES

For an explanation of the terms used in this section, see attributes(7).

Interface Attribute Value
readdir() Thread safety MT-Unsafe race:dirstream

In the current POSIX.1 specification (POSIX.1-2008), readdir() is not required to be thread-safe. However, in modern implementations (including the glibc implementation), concurrent calls to readdir() that specify different directory streams are thread-safe. In cases where multiple threads must read from the same directory stream, using readdir() with external synchronization is still preferable to the use of the deprecated readdir_r(3) function. It is expected that a future version of POSIX.1 will require that readdir() be thread-safe when concurrently employed on different directory streams.

CONFORMING TO

POSIX.1-2001, POSIX.1-2008, SVr4, 4.3BSD.

NOTES

A directory stream is opened using opendir(3).

The order in which filenames are read by successive calls to readdir() depends on the filesystem implementation; it us unlikely that the names will be sorted in any fashion.

Only the fields d_name and (as an XSI extension) d_ino are specified in POSIX.1. Other than Linux, the d_type field is available mainly only on BSD systems. The remaining fields are available on many, but not all systems. Under glibc, programs can check for the availability of the fields not defined in POSIX.1 by testing whether the macros _DIRENT_HAVE_D_NAMLEN, _DIRENT_HAVE_D_RECLEN, _DIRENT_HAVE_D_OFF, or _DIRENT_HAVE_D_TYPE are defined.

The d_name field

The dirent structure definition shown above is taken from the glibc headers, and shows the d_name field with a fixed size.

[Warning] Warning

applications should avoid any dependence on the size of the d_name field. POSIX defines it as char d_name[], a character array of unspecified size, with at most NAME_MAX characters preceding the terminating null byte ('\0').

POSIX.1 explicitly notes that this field should not be used as an lvalue. The standard also notes that the use of sizeof(d_name) is incorrect; use strlen(d_name) instead. (On some systems, this field is defined as char d_name[1]!) By implication, the use sizeof(struct dirent) to capture the size of the record including the size of d_name is also incorrect.

Note that while the call

fpathconf(fd, _PC_NAME_MAX)

returns the value 255 for most filesystems, on some filesystems (e.g., CIFS, Windows SMB servers), the null-terminated filename that is (correctly) returned in d_name can actually exceed this size. In such cases, the d_reclen field will contain a value that exceeds the size of the glibc dirent structure shown above.

SEE ALSO

getdents(2), read(2), closedir(3), dirfd(3), ftw(3), offsetof(3), opendir(3), readdir_r(3), rewinddir(3), scandir(3), seekdir(3), telldir(3)

COLOPHON

This page is part of release 4.07 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man−pages/.


  Copyright (C) 1993 David Metcalfe (davidprism.demon.co.uk)
and Copyright (C) 2008, 2016 Michael Kerrisk <mtk.manpagesgmail.com>

%%%LICENSE_START(VERBATIM)
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working
professionally.

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.
%%%LICENSE_END

References consulted:
    Linux libc source code
    Lewine's _POSIX Programmer's Guide_ (O'Reilly & Associates, 1991)
    386BSD man pages
Modified Sat Jul 24 16:09:49 1993 by Rik Faith (faithcs.unc.edu)
Modified 11 June 1995 by Andries Brouwer (aebcwi.nl)
Modified 22 July 1996 by Andries Brouwer (aebcwi.nl)
2007-07-30 Ulrich Drepper <drepperredhat.com>, mtk:
    Rework discussion of nonstandard structure fields.