Name

matherr — SVID math library exception handling

Synopsis

#include <math.h>
int matherr( struct exception *exc);
 
[Note] Note
Feature Test Macro Requirements for glibc (see feature_test_macros(7)): significand(), significandf(), significandl():
/* Since glibc 2.19:
*/ _DEFAULT_SOURCE || /* Glibc versions <= 2.19:
*/ _SVID_SOURCE
Link with \fI\-lm\fP.
extern _LIB_VERSION_TYPE _LIB_VERSION;
  

DESCRIPTION

The System V Interface Definition (SVID) specifies that various math functions should invoke a function called matherr() if a math exception is detected. This function is called before the math function returns; after matherr() returns, the system then returns to the math function, which in turn returns to the caller.

The matherr() mechanism is supported by glibc, but is now obsolete: new applications should use the techniques described in math_error(7) and fenv(3). This page documents the glibc matherr() mechanism as an aid for maintaining and porting older applications.

To employ matherr(), the programmer must define the _SVID_SOURCE feature test macro (before including any header files), and assign the value _SVID_ to the external variable _LIB_VERSION.

The system provides a default version of matherr(). This version does nothing, and returns zero (see below for the significance of this). The default matherr() can be overridden by a programmer-defined version, which will be invoked when an exception occurs. The function is invoked with one argument, a pointer to an exception structure, defined as follows:

struct exception {
  int   type;
/* Exception type */
  char * name;
/* Name of function causing exception */
  double   arg1;
/* 1st argument to function */
  double   arg2;
/* 2nd argument to function */
  double   retval;
/* Function return value */
};

The type field has one of the following values:

DOMAIN

A domain error occurred (the function argument was outside the range for which the function is defined). The return value depends on the function; errno is set to EDOM.

SING

A pole error occurred (the function result is an infinity). The return value in most cases is HUGE (the largest single precision floating-point number), appropriately signed. In most cases, errno is set to EDOM.

OVERFLOW

An overflow occurred. In most cases, the value HUGE is returned, and errno is set to ERANGE.

UNDERFLOW

An underflow occurred. 0.0 is returned, and errno is set to ERANGE.

TLOSS

Total loss of significance. 0.0 is returned, and errno is set to ERANGE.

PLOSS

Partial loss of significance. This value is unused on glibc (and many other systems).

The arg1 and arg2 fields are the arguments supplied to the function (arg2 is undefined for functions that take only one argument).

The retval field specifies the return value that the math function will return to its caller. The programmer-defined matherr() can modify this field to change the return value of the math function.

If the matherr() function returns zero, then the system sets errno as described above, and may print an error message on standard error (see below).

If the matherr() function returns a nonzero value, then the system does not set errno, and doesn't print an error message.

Math functions that employ matherr()

The table below lists the functions and circumstances in which matherr() is called. The "Type" column indicates the value assigned to exc−>type when calling matherr(). The "Result" column is the default return value assigned to exc−>retval.

The "Msg?" and "errno" columns describe the default behavior if matherr() returns zero. If the "Msg?" columns contains "y", then the system prints an error message on standard error.

The table uses the following notations and abbreviations:

x        first argument to function
y        second argument to function
fin      finite value for argument
neg      negative value for argument
int      integral value for argument
o/f      result overflowed
u/f      result underflowed
|x|      absolute value of x
X_TLOSS  is a constant defined in <math.h>
Function Type Result Msg? errno
acos(|x|>1) DOMAIN HUGE y EDOM
asin(|x|>1) DOMAIN HUGE y EDOM
atan2(0,0) DOMAIN HUGE y EDOM
acosh(x<1) DOMAIN NAN y EDOM
atanh(|x|>1) DOMAIN NAN y EDOM
atanh(|x|==1) SING (x>0.0)? y EDOM
HUGE_VAL :    
−HUGE_VAL    
cosh(fin) o/f OVERFLOW HUGE n ERANGE
sinh(fin) o/f OVERFLOW (x>0.0) ? n ERANGE
HUGE : −HUGE    
sqrt(x<0) DOMAIN 0.0 y EDOM
hypot(fin,fin) o/f OVERFLOW HUGE n ERANGE
exp(fin) o/f OVERFLOW HUGE n ERANGE
exp(fin) u/f UNDERFLOW 0.0 n ERANGE
exp2(fin) o/f OVERFLOW HUGE n ERANGE
exp2(fin) u/f UNDERFLOW 0.0 n ERANGE
exp10(fin) o/f OVERFLOW HUGE n ERANGE
exp10(fin) u/f UNDERFLOW 0.0 n ERANGE
j0(|x|>X_TLOSS) TLOSS 0.0 y ERANGE
j1(|x|>X_TLOSS) TLOSS 0.0 y ERANGE
jn(|x|>X_TLOSS) TLOSS 0.0 y ERANGE
y0(x>X_TLOSS) TLOSS 0.0 y ERANGE
y1(x>X_TLOSS) TLOSS 0.0 y ERANGE
yn(x>X_TLOSS) TLOSS 0.0 y ERANGE
y0(0) DOMAIN −HUGE y EDOM
y0(x<0) DOMAIN −HUGE y EDOM
y1(0) DOMAIN −HUGE y EDOM
y1(x<0) DOMAIN −HUGE y EDOM
yn(n,0) DOMAIN −HUGE y EDOM
yn(x<0) DOMAIN −HUGE y EDOM
lgamma(fin) o/f OVERFLOW HUGE n ERANGE
lgamma(−int) or SING HUGE y EDOM
lgamma(0)        
tgamma(fin) o/f OVERFLOW HUGE_VAL n ERANGE
tgamma(−int) SING NAN y EDOM
tgamma(0) SING copysign( y ERANGE
HUGE_VAL,x)    
log(0) SING −HUGE y EDOM
log(x<0) DOMAIN −HUGE y EDOM
log2(0) SING −HUGE n EDOM
log2(x<0) DOMAIN −HUGE n EDOM
log10(0) SING −HUGE y EDOM
log10(x<0) DOMAIN −HUGE y EDOM
pow(0.0,0.0) DOMAIN 0.0 y EDOM
pow(x,y) o/f OVERFLOW HUGE n ERANGE
pow(x,y) u/f UNDERFLOW 0.0 n ERANGE
pow(NaN,0.0) DOMAIN x n EDOM
0**neg DOMAIN 0.0 y EDOM
neg**non-int DOMAIN 0.0 y EDOM
scalb() o/f OVERFLOW (x>0.0) ? n ERANGE
HUGE_VAL :    
−HUGE_VAL    
scalb() u/f UNDERFLOW copysign( n ERANGE
0.0,x)    
fmod(x,0) DOMAIN x y EDOM
remainder(x,0) DOMAIN NAN y EDOM

ATTRIBUTES

For an explanation of the terms used in this section, see attributes(7).

Interface Attribute Value
matherr() Thread safety MT-Safe

EXAMPLE

The example program demonstrates the use of matherr() when calling log(3). The program takes up to three command-line arguments. The first argument is the floating-point number to be given to log(3). If the optional second argument is provided, then _LIB_VERSION is set to _SVID_ so that matherr() is called, and the integer supplied in the command-line argument is used as the return value from matherr(). If the optional third command-line argument is supplied, then it specifies an alternative return value that matherr() should assign as the return value of the math function.

The following example run, where log(3) is given an argument of 0.0, does not use matherr():

$ ./a.out 0.0
errno: Numerical result out of range
x=-inf

In the following run, matherr() is called, and returns 0:

$ ./a.out 0.0 0
matherr SING exception in log() function
        args:   0.000000, 0.000000
        retval: −340282346638528859811704183484516925440.000000
log: SING error
errno: Numerical argument out of domain
x=-340282346638528859811704183484516925440.000000

The message "log: SING error" was printed by the C library.

In the following run, matherr() is called, and returns a nonzero value:

$ ./a.out 0.0 1
matherr SING exception in log() function
        args:   0.000000, 0.000000
        retval: −340282346638528859811704183484516925440.000000
x=-340282346638528859811704183484516925440.000000

In this case, the C library did not print a message, and errno was not set.

In the following run, matherr() is called, changes the return value of the math function, and returns a nonzero value:

$ ./a.out 0.0 1 12345.0
matherr SING exception in log() function
        args:   0.000000, 0.000000
        retval: −340282346638528859811704183484516925440.000000
x=12345.000000

Program source

#define _SVID_SOURCE
#include <errno.h>
#include <math.h>
#include <stdio.h>
#include <stdlib.h>

static int matherr_ret = 0;     /* Value that matherr()
                                   should return */
static int change_retval = 0;   /* Should matherr() change
                                   function's return value? */
static double new_retval;       /* New function return value */

int
matherr(struct exception *exc)
{
    fprintf(stderr, "matherr %s exception in %s() function\n",
           (exc−>type == DOMAIN) ?    "DOMAIN" :
           (exc−>type == OVERFLOW) ?  "OVERFLOW" :
           (exc−>type == UNDERFLOW) ? "UNDERFLOW" :
           (exc−>type == SING) ?      "SING" :
           (exc−>type == TLOSS) ?     "TLOSS" :
           (exc−>type == PLOSS) ?     "PLOSS" : "???",
            exc−>name);
    fprintf(stderr, "        args:   %f, %f\n",
            exc−>arg1, exc−>arg2);
    fprintf(stderr, "        retval: %f\n", exc−>retval);

    if (change_retval)
        exc−>retval = new_retval;

    return matherr_ret;
}

int
main(int argc, char *argv[])
{
    double x;

    if (argc < 2) {
        fprintf(stderr, "Usage: %s <argval>"
                " [<matherr−ret> [<new−func−retval>]]\n", argv[0]);
        exit(EXIT_FAILURE);
    }

    if (argc > 2) {
        _LIB_VERSION = _SVID_;
        matherr_ret = atoi(argv[2]);
    }

    if (argc > 3) {
        change_retval = 1;
        new_retval = atof(argv[3]);
    }

    x = log(atof(argv[1]));
    if (errno != 0)
        perror("errno");

    printf("x=%f\n", x);
    exit(EXIT_SUCCESS);
}

SEE ALSO

fenv(3), math_error(7), standards(7)

COLOPHON

This page is part of release 4.07 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man−pages/.


  t
Copyright (c) 2008, Linux Foundation, written by Michael Kerrisk
    <mtk.manpagesgmail.com>

%%%LICENSE_START(VERBATIM)
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working
professionally.

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.
%%%LICENSE_END